A/D Conversion 24 Bit linear, Sigma-Delta, 128 times oversampling 24 Bit linear, sigma-delta, 128x oversampling 24 Bit linear, Sigma-Delta, 128 times oversampling 24 Bit linear, Sigma-Delta, 128 times oversampling
Analog Inputs 2 audio inputs on internal slot connector, pre-/post fader selectable 2 audio inputs on internal slot connector, pre-/post fader selectable Yes Yes
CAN Bus Interface 10 - 500 kbaud, 2x RJ-45 (IRIS-Net Control) None 10 - 500 kbaud, 2x RJ-45 (IRIS-Net Control) 10 - 500 kbaud, 2x RJ-45 (IRIS-Net Control)
Control Protocol CAN Bus OMNEO CAN-Bus (with RCM 26 module) CAN Bus
D/A Conversion 24 Bit, Sigma-Delta, 128 times over-sampling 24 Bit linear, sigma-delta, 128x oversampling 24 Bit, Sigma-Delta, 128 times over-sampling 24 Bit, Sigma-Delta, 128 times over-sampling
Data Format 24 Bit linear A/D and D/A conversion, 48 Bit processing 24 Bit linear A/D and D/A conversion, 48 Bit processing 24 Bit linear A/D and D/A conversion, 48 Bit processing 24 Bit linear A/D and D/A conversion, 48 Bit processing CAN specification 2.0B (29 bit ID)
Digital Inputs AES3 (AES/EBU) format, XLR In/Thru connectors Omneo Network and AES3 (AES/EBU) format, XLR in/ thru connectors Optional with RCM-26 Optional with RCM-26
FIR-Drive Yes Yes Optional with RCM-26 Optional with RCM-26
GPIO Control Ports 1 x 6-pole Euro block 2 Control Inputs 2 Control Outputs 2 Reference Outputs (+5 V, 200 mA / GND) 1 x 6-pole Euro block 2 control inputs (Uin max. 5 V) 2 control outputs (2x 100 mA) 2 reference outputs (+5 V, 200 mA; GND) 1 x 6-pole Euro block, 2 control inputs, 2 control outputs, (+5 V, 200 mA/GND) 1 x 6-pole Euro block, 2 control inputs, 2 control outputs, (+5 V, 200 mA/GND)
Internal Processing 2 DSPs (150 MHz, 300 MIPS) Dual core DSP, 500 MIPS 2 DSPs (150 MHz, 300 MIPS) 2 DSPs (150 MHz, 300 MIPS)
Network Control (IRIS-Net) Yes Yes Optional with RCM-26 Optional with RCM-26
Sample Rate 48 kHz 48 kHz 48 kHz 48 kHz
Sample Rate Conversion (SRC) 32 kHz - 192 kHz internal Sample-Rate- Converter 32–192 kHz, internal sample rate- converter 32 kHz - 192 kHz, internal Sample-Rate- Converter 32 kHz - 192 kHz, internal Sample-Rate- Converter
Signal-to-Noise Ratio (A-weighted) 116 dB weighted) ADC: 120 dB typical DAC: 120 dB typical AES3: 128 dB typical Analog In to Analog Out: 116 dB typical dB 109 dB 111 dB
THD+N < 0.005% < 0.002 %
Height 84.7 mm (3.33") 80.4 mm (3.17") 88.1 mm (3.47") 88.1 mm (3.47") 39.5 mm (1.56")
Width 80.4 mm (3.17") 84.7 mm (3.33") 482.6 mm (19") 482.6 mm (19") 105 mm (4.13")
Depth 230.3 mm (9.07") 230.8 mm (9.09") 512 mm (20.16") 512 mm (20.16") 130.4 mm (5.13")
Weight Net 8.47 oz (240 g) 14.11 oz (400 g) 14.2 kg (31.31 lbs) 14.5 kg (31.97 lbs) 28.22 oz (800 g) with 19“ panel
Amplifier Gain 39, 35, or 32 dB Switchable 41.5/35/32 dB Switchable
Continuous Rated Power (1 kHz, THD 1%) 2Ω 2000 Watts 3500 Watts
Continuous Rated Power (1 kHz, THD 1%) 4Ω 1450 Watts 2500 Watts
Continuous Rated Power (1 kHz, THD 1%) 8Ω 850 Watts 1500 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω 1200 Watts 2100 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω 600 Watts 1050 Watts
DIM 30 0.02 % 0.02 %
Electronics Type Amplifier
Impedance 2/4/8 Ω 2/4/8 Ω
Input Impedance (Balanced) 20 kΩ 20 kΩ
Input Sensitivity 0 dBu / +6 dBu / +7 dBu Selectable 0/+6/+9 Selectable
Intermodulation Distortion (SMPTE) 0.05 % 0.05 %
Maximum Bridged Output 4Ω 3800 Watts 7000 Watts
Maximum Bridged Output 8Ω 2900 Watts 5000 Watts
Power Consumption 1000 W 1450 W 200 mA max
Power Supply 100 - 240V, 50 - 60 Hz 100-240 V, 50-60 Hz + 5 VDC (from USB interface)
Slew Rate 30 V/µs 35 V/µs
Topology Class-H grounded bridge Class-H grounded bridge
Total Harmonic Distortion 0.05 % 0.05 %
Maximum Output Voltage 8.7 V / +21 dBu
Output Impedance (Balanced) < 100 Ω
 
RCM-26

RCM-28

TG5

TG7

UCC1
A/D Conversion 24 Bit linear, Sigma-Delta, 128 times oversampling 24 Bit linear, sigma-delta, 128x oversampling 24 Bit linear, Sigma-Delta, 128 times oversampling 24 Bit linear, Sigma-Delta, 128 times oversampling
Analog Inputs 2 audio inputs on internal slot connector, pre-/post fader selectable 2 audio inputs on internal slot connector, pre-/post fader selectable Yes Yes
CAN Bus Interface 10 - 500 kbaud, 2x RJ-45 (IRIS-Net Control) None 10 - 500 kbaud, 2x RJ-45 (IRIS-Net Control) 10 - 500 kbaud, 2x RJ-45 (IRIS-Net Control)
Control Protocol CAN Bus OMNEO CAN-Bus (with RCM 26 module) CAN Bus
D/A Conversion 24 Bit, Sigma-Delta, 128 times over-sampling 24 Bit linear, sigma-delta, 128x oversampling 24 Bit, Sigma-Delta, 128 times over-sampling 24 Bit, Sigma-Delta, 128 times over-sampling
Data Format 24 Bit linear A/D and D/A conversion, 48 Bit processing 24 Bit linear A/D and D/A conversion, 48 Bit processing 24 Bit linear A/D and D/A conversion, 48 Bit processing 24 Bit linear A/D and D/A conversion, 48 Bit processing CAN specification 2.0B (29 bit ID)
Digital Inputs AES3 (AES/EBU) format, XLR In/Thru connectors Omneo Network and AES3 (AES/EBU) format, XLR in/ thru connectors Optional with RCM-26 Optional with RCM-26
FIR-Drive Yes Yes Optional with RCM-26 Optional with RCM-26
GPIO Control Ports 1 x 6-pole Euro block 2 Control Inputs 2 Control Outputs 2 Reference Outputs (+5 V, 200 mA / GND) 1 x 6-pole Euro block 2 control inputs (Uin max. 5 V) 2 control outputs (2x 100 mA) 2 reference outputs (+5 V, 200 mA; GND) 1 x 6-pole Euro block, 2 control inputs, 2 control outputs, (+5 V, 200 mA/GND) 1 x 6-pole Euro block, 2 control inputs, 2 control outputs, (+5 V, 200 mA/GND)
Internal Processing 2 DSPs (150 MHz, 300 MIPS) Dual core DSP, 500 MIPS 2 DSPs (150 MHz, 300 MIPS) 2 DSPs (150 MHz, 300 MIPS)
Network Control (IRIS-Net) Yes Yes Optional with RCM-26 Optional with RCM-26
Sample Rate 48 kHz 48 kHz 48 kHz 48 kHz
Sample Rate Conversion (SRC) 32 kHz - 192 kHz internal Sample-Rate- Converter 32–192 kHz, internal sample rate- converter 32 kHz - 192 kHz, internal Sample-Rate- Converter 32 kHz - 192 kHz, internal Sample-Rate- Converter
Signal-to-Noise Ratio (A-weighted) 116 dB weighted) ADC: 120 dB typical DAC: 120 dB typical AES3: 128 dB typical Analog In to Analog Out: 116 dB typical dB 109 dB 111 dB
THD+N < 0.005% < 0.002 %
Height 84.7 mm (3.33") 80.4 mm (3.17") 88.1 mm (3.47") 88.1 mm (3.47") 39.5 mm (1.56")
Width 80.4 mm (3.17") 84.7 mm (3.33") 482.6 mm (19") 482.6 mm (19") 105 mm (4.13")
Depth 230.3 mm (9.07") 230.8 mm (9.09") 512 mm (20.16") 512 mm (20.16") 130.4 mm (5.13")
Weight Net 8.47 oz (240 g) 14.11 oz (400 g) 14.2 kg (31.31 lbs) 14.5 kg (31.97 lbs) 28.22 oz (800 g) with 19“ panel
Amplifier Gain 39, 35, or 32 dB Switchable 41.5/35/32 dB Switchable
Continuous Rated Power (1 kHz, THD 1%) 2Ω 2000 Watts 3500 Watts
Continuous Rated Power (1 kHz, THD 1%) 4Ω 1450 Watts 2500 Watts
Continuous Rated Power (1 kHz, THD 1%) 8Ω 850 Watts 1500 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω 1200 Watts 2100 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω 600 Watts 1050 Watts
DIM 30 0.02 % 0.02 %
Electronics Type Amplifier
Impedance 2/4/8 Ω 2/4/8 Ω
Input Impedance (Balanced) 20 kΩ 20 kΩ
Input Sensitivity 0 dBu / +6 dBu / +7 dBu Selectable 0/+6/+9 Selectable
Intermodulation Distortion (SMPTE) 0.05 % 0.05 %
Maximum Bridged Output 4Ω 3800 Watts 7000 Watts
Maximum Bridged Output 8Ω 2900 Watts 5000 Watts
Power Consumption 1000 W 1450 W 200 mA max
Power Supply 100 - 240V, 50 - 60 Hz 100-240 V, 50-60 Hz + 5 VDC (from USB interface)
Slew Rate 30 V/µs 35 V/µs
Topology Class-H grounded bridge Class-H grounded bridge
Total Harmonic Distortion 0.05 % 0.05 %
Maximum Output Voltage 8.7 V / +21 dBu
Output Impedance (Balanced) < 100 Ω