Access to this file requires a registered account. Log in or use the link below to register an account.
  • Home
  • Electronics
NetMax Digital Matrix System
The NetMax N8000 System Controller is a state-of-the-art digital matrix system offering comprehensive management of all aspects of professional sound reinforcement systems. Supporting both distributed and central processing, NetMax is a powerful physical complement to EV's IRIS-Net protocol, which gives designers and end-users the industry’s most flexible routing, DSP, and component-level system control and supervision. EQ, crossovers, dynamics, FIR-Drive loudspeaker optimization—NetMax does it all with superior digital fidelity. Each 2RU NetMax chassis supports up to 1900 MIPS of processing power and up to 32 local audio channels. And with NetMax's modular, field-configurable architecture, every system can be tailored to current needs without being locked out of future expansion. Designed for both installations and touring systems, NetMax is an indispensable tool for concert halls, houses of worship, hotels, casinos, convention centers, sporting arenas, and stadiums. Simply put, there's no more powerful, intelligent way to tame the complexity of modern sound systems than NetMax.
Compare Specifications

Knowledgebase

Contact Support

Tel: (866) 782-8346

More Support Resources

AI-1
  • Eight electronically balanced line-level inputs
  • Euroblock connectors
  • 20 KΩ input impedance
  • 117 dB dynamic range for superior sonic quality
  • Automatic configuration
  • IRIS-Net notification of installation and removal
  • On-board DSP (100 MIPS) 
AO-1
  • Eight electronically balanced line-level outputs
  • Euroblock connectors
  • 118 dB dynamic range for superior sonic quality
  • 100 Ω output impedance 
  • Automatic configuration
  • IRIS-Net notification of installation and removal
  • On-board DSP (100 MIPS) 
CM-1
  • Connect NetMax to a CobraNet digital audio network
  • Two 100BASE-TX Ethernet interfaces (IEEE 802.3u compatible) for system redundancy
  • 100 mbps data transmission rate
  • Four serial ports each for input and output for a total of up to 32 ins and 32 outs
  • 48 kHz sample rate and 16-, 20-, or 24-bit word-length
  • Control, monitoring, configuration, and firmware updates via Ethernet 
  • Status LEDs for link, activity, fault, and CobraNet conductor status
DI-1
  • Eight channels of AES/EBU or S/PDIF digital audio
  • Four input connectors, Euroblock or TOSLINK optical
  • Supports sample rates from 32 - 192 kHz
  • Independent sample rate conversion for each input
  • Lock indication LED
  • On-board DSP (100 MIPS) 
DM-1
  • Connect NetMax to a Dante digital audio network
  • Transmit up to 32 ins and 32 outs at 48 or 96 kHz sample rate and 16-, 20-, or 24-bit word-length
  • Low latency (typically below 1 ms)
  • Two Gigabit Ethernet interfaces for system redundancy
  • Status LEDs for each interface
  • Dante Zen device-discovery
  • Compatible with Dante Virtual Soundcard
DO-1
  • Eight channels of AES/EBU digital audio output
  • Four Euroblock output connectors
  • 48 kHz sample rate
  • +21 dBu maximum output level
  • Automatic configuration via IRIS-Net with installation/removal notification
  • On-board DSP (100 MIPS)
DSP-1
  • Enhanced DSP power for NetMax controllers
  • Adds 300 MIPS computing capacity
  • Easy field installation into chassis card slot
  • 48-bit signal processing
  • Two RAM banks (512k x 24 Bit) for delay lines up to 21.8 seconds 
  • Double-precision DSP algorithms. 
  • Automatic configuration via IRIS-Net with installation/removal notification
DSP-2
The DSP-2 v2 is a DSP extension module for use in an Electro-Voice NetMax system. The module provides additional DSP for extending the signal processing capacity and additional RAM memory for implementing longer delay times or a greater number of delay lines.
MI-1
  • Eight electronically balanced mic/line inputs
  • Euroblock connectors
  • 48 V phantom power
  • Mic/line pad, selectable via IRIS-Net
  • Gain and level adjustable via IRIS-Net
  • Automatic configuration
  • IRIS-Net notification of installation and removal
  • On-board DSP (100 MIPS)
N8000
  • Full IRIS-Net supervision, control, and scheduling
  • Comprehensive 32-channel routing and mixing
  • Huge range of DSP filters, EQ, dynamics, and delays
  • FIR-Drive loudspeaker optimization
  • 300 MIPS internal processing
  • Up to 1000 MIPS of processing power available per unit
  • 115 dB dynamic range for clean, quiet sound
  • Internal 48-bit processing for outstanding audio fidelity
  • Auto-compiling DSP engine with ultra-low fixed latency
  • Modular architecture with hardware expansion slots  
  • Fully-programmable analog and digital GPIO support
  • Support for Ethernet, RS-232, USB, and CAN
  • CobraNet and Dante audio networking options
PWS-4 PWS-6 and PWS-C
  • Modular standard-mount keypads for NetMax
  • Convenient control for volume, source, presets, etc.
  • Up to three front units in a wall station
  • PWS-C connects front units to CAN bus
  • Easy daisy-chaining with included connection wire
  • Easy labeling, protected by transparent cover
  • Integrated status LEDs
  • Button and LED configuration via IRIS-Net 
  • Customizable button behavior (momentary, latching, or radio)
TPI-5 Touch Panel Controller
The TPI-5 Touch Panel is a display interface device for controlling and monitoring Electro-Voice networked systems. TPI Touch Panels are configured and programmed using the IRIS-Net software software environment and operate over an Ethernet connection. The shallow depth of the assembly lets you easily flush mount the panel. A separate power supply is required.