One moment please while we configure Electro-Voice.com for you...
Electro-Voice.com

Welcome to Electro-Voice.com. Please specify your country so we can customize your experience.

The Americas
amer
Asia & the Pacific Rim
apr
Europe,
the Middle East, & Africa
emea
cn
lam
Access to this file requires a registered account. Log in or use the link below to register an account.
  • Home
  • Electronics
TG Tour Grade Amplifiers
Designed for the most demanding applications in both touring and installed sound, EV's ultra-reliable Tour Grade amplifiers offer a unique combination of output power, sonic excellence and high efficiency, all in a compact, lightweight format that's ideal for life on the road. Based on grounded-bridge Class-H topology, Tour Grade amps feature an integrated switch-mode power supply for maximum power per pound, with plenty of headroom to handle transient peaks and low loads. The optional RCM- 26 remote control module adds state-of-the-art IRISNet- controlled DSP, including FIR-Drive loudspeaker optimization, IIR filters, signal routing, level control, dynamics and system supervision. The optional RCM-28 module provides additional DSP options as well as the revolutionary OMNEO Media Networking Architecture for the most demanding applications.
Compare Specifications

Knowledgebase

Contact Support

Tel: (866) 782-8346

More Support Resources

RCM-26
  • Extend Tour Grade performance with powerful DSP functionality 
  • Advanced FIR-Drive loudspeaker optimization
  • High precision load impedance supervision
  • Two GPI and two GPO ports 
  • One-button system test for fast, complete check of connected cables and components
  • Pilot tone detection for cable supervision
  • Six recallable DSP/configuration presets
  • Parallel RJ-45 CAN bus connectors
RCM-28
The RCM-28 Remote Control Module is a two-channel digital controller module for live sound reinforcement, PA and fixed installation applications. The module can be used in Electro-Voice Tour Grade amplifier models. Installing the RCM-28 turns a conventional amp into a remote amplifier, which, at any time, provides complete overview of the overall system status and control of all system parameters. RCM-28 modules allow the integration of amplifiers into an OMNEO network with up to 100 devices in a single subnet without additional hardware. OMNEO is a media networking architecture for professional applications. Using standard IP Ethernets, media products that integrate OMNEO can be assembled into networks of 2 to 10,000 cooperating devices that exchange studio-quality synchronized multichannel audio and share common control systems. This offers the possibility to control and monitor an entire sound system from one or more PCs using the IRIS-Net - Intelligent Remote & Integrated Supervision - software package. In addition to digital signal processing functions, the RCM-28 also offers a digital audio input (AES/EBU), OMNEO network audio inputs and outputs, and freely programmable control inputs and control outputs.
TG5
  • High-level touring performance
  • Rugged, lightweight package
  • 2000 W per channel (2 Ω)
  • Grounded Bridge Class-H design
  • Switch-mode power supply
  • Microprocessor-controlled
  • Front LCD panel for operation-mode setup and monitoring
  • Slot for optional RCM-26 IRIS-Net-compatible DSP and control module
  • 11-level protection package
  • Only 31.4 lbs (14.2 kg)
TG7
  • High-power performance for top-level tours
  • Rugged, lightweight package
  • 3500 W per channel (2 Ω)
  • Grounded Bridge Class-H design
  • Switch-mode power supply
  • Microprocessor-controlled
  • Front LCD panel for operation-mode setup and monitoring
  • Slot for optional RCM-26 IRIS-Net-compatible DSP and control module
  • 11-level protection package
  • Only 32 lbs (14.5 kg)
UCC1
  • USB-CAN converter for IRIS-Net enabled devices
  • Supports up to 100 CAN devices
  • Parallel CAN connections on RJ-45 Ethercons
  • USB-powered
  • XLR jack for audio bus monitoring
  • 19-inch rackmount panel included
  • Status LED shows CAN activity and device status