EVH-1152D/43

Premium Arrayable point-source coaxial horn loaded loudspeaker

Summary & Images Specs Where to buy Downloads & Support
  • Ideal for reverberant spaces
  • Pattern control maintained down to 500 Hz
  • 15-inch SMX2151 woofer
  • 3-inch DH7N titanium/neodymium HF compression driver
  • Rotatable Constant-directivity waveguide
  • Six available coverage patterns from 40º x 30º to 90º x 90º 
  • 106 dB sensitivity, 139 dB maximum SPL
  • Power handling: 500 W continuous, 2000 W peak
  • 4th-order passive crossover with HF protection
  • Trapezoidal enclosure in three finishes: EVCoat, FG or PI
  • M10 threaded suspension points (28)

The EVH-1152D/43 utilizes the DH7N, a high-output 3” titanium compression driver, coupled to a Constant Directivity 40° x 30° waveguide. The SMX2151 15” woofer was developed using FEA optimization for motor, suspension, and electrical design to ensure very low distortion, high efficiency, and maximum intelligibility at high SPL. The crossover uses steep, 24-dB-per-octave slopes with equalization for very smooth response in the vocal range, linear off-axis response, and a protection circuit for long-term reliability. This combination of technologies results in a smooth response to 20 kHz and excellent pattern control down to 500 Hz.

Specifications

Frequency Range (-10 dB) 50 Hz - 20 kkHz
Suspension (28) M10 threaded suspension points
Minimum Impedance 6.0Ω

Nominal Impedance (Passive)
HF Transducer DH7N, 3" (76 mm) diaphragm compression driver
Frequency Response (-3 dB)¹ 60 Hz - 17 kHz
Max. SPL/1m (calc)² 139dB
Coverage (Nominal -6 dB) H 40°
LF Transducer SMX2151, 15" (381 mm) driver
Coverage (Nominal -6 dB) V 30°
System Power Handling (Continuous/Program/Peak) 500/1000/2000 Watts
Crossover Frequency 1300Hz
Enclosure Material 13-ply weather-resistant birch with EVCoat
Grille 16 GA powder-coated galvanneal with rotatable logo
Sensitivity 1 W/1 m 106dB
Height 30.26" (768.6mm)
Width 30.26" (768.6mm)
Recommended High-Pass Frequency 60Hz
Depth 26.78" (680.1mm)
Weight Net 145.73lbs (66.1kg)
Input Connections Dual four-pin 10 AWG Phoenix/Euro Block screw-terminals

Videos

Recommended Amplifiers

For optimal sound system performance, Electro-Voice recommends the following amplifiers for EVH-1152D/43.

Related Products Learn More Related Products Learn More Related Products Learn More
Two-Channel
Multi-Channel
DSP
Direct Drive
OMNEO (Dante, OCA)
Installation
Live Sound

Where to Buy

Install Sound Partners

Install Where To Buy

Electro-Voice together with our certified partners, are ready to help support you through planning, purchase, and setup. Services available through our network of highly-qualified associates and partners may include:

  1. System Design
  2. Installation
  3. Programming & Commissioning
Get started

Downloads

Downloads Library

Warranty & After Sales Programs

Compatible Products

sprites_global sprites_ev