Access to this file requires a registered account. Log in or use the link below to register an account.

PA4150L

Quad 150 W per channel power amplifier

  • PA4150L
  • Flexible multi-channel power for installation 
  • Ideal for sound reinforcement, paging, and life safety 
  • 150 W per channel into 4 Ω
  • Bridged mode for dual 315 W outputs into 8 Ω
  • Compact 2 RU design
  • Stepped rear-panel level attenuation
  • Selectable 50 Hz or 300 Hz high-pass filter
  • Thermal protection, peak limiting, turn-on delay
  • Phoenix-type inputs and outputs
  • Three-stage front-to-rear fans
  • Integrated rack ears for direct mounting
Amplifier Gain 30 dB
Continuous Rated Power (1 kHz, THD 1%) 4Ω 160 Watts
Continuous Rated Power (1 kHz, THD 1%) 8Ω 100 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω 150 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω 75 Watts
Crosstalk< < -75 dB ref. 1kHz, @ 10% rated output power
DIM 30 < 0.1 %
Frequency Response < 10Hz - 40kHz -1dB, ref. 1kHz
Impedance 4/8 Ω
Input Impedance (Balanced) > 20 kΩ
Input Sensitivity 0 dBu (775mV) @ rated output power or voltage, 1kHz
Intermodulation Distortion (SMPTE) < 0.1 %
Network Control (IRIS-Net) No
Number of Channels 4
Rated output power (*rated load) THD < 0.2%, 20Hz – 20kHz 150/75 W 4Ω/8Ω
Rated output power (*rated load) THD < 1%, 1kHz 160/100 W 4Ω/8Ω
Signal-to-Noise Ratio (A-weighted) 101 dB
Slew Rate 16 V/µs
Total Harmonic Distortion < 0.1 %
Height 2RU 88 mm (3.46")
Width 483 mm (19.02")
Depth 406 mm (15.98")
Weight Net 18 kg (39.68 lbs)
Optional accessories
may be shown
Hover over image to zoom
Click image for full size
Knowledge & Support
Technical Support Group
Tel: (866) 782-8346
audiosupport@us.bosch.com

Warranty Information