PA2250T

Dual 250 W per channel power amplifier

  • Efficient performance for low impedance or distributed systems 
    Ideal for sound reinforcement, paging, and life safety 
    250 W per channel for 4 Ω or 70/100 V lines
    Bridged mono out for 540 W into 8 Ω
    Compact 2 RU design
    Stepped rear-panel level attenuation
    Selectable 50 Hz or 300 Hz high-pass filter
    Thermal protection, peak limiting, turn-on delay
    Phoenix-type inputs and outputs
    Three-stage front-to-rear fans
    Integrated rack ears for direct mounting

Specifications

Amplifier Gain 34.3 dB
Channlels 2
Continuous Rated Power (1 kHz, THD 1%) 100v 270 Watts

Specifications

Continuous Rated Power (1 kHz, THD 1%) 2Ω 270 Watts
Continuous Rated Power (1 kHz, THD 1%) 4Ω 270 Watts
Continuous Rated Power (1 kHz, THD 1%) 70v 270 Watts
Continuous Rated Power (1 kHz, THD 1%) 8Ω 135 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 100v 250 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω 250 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 70v 250 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω 125 Watts
Crosstalk < -75 dB
Depth 406 mm
DIM 30 < 0.1 %
Frequency Response 65Hz - 40kHz
Height 88 mm
Impedance 4/8 Ω
Input Impedance (Balanced) > 20 kΩ
Input Sensitivity 0 dBu (775mV)
Intermodulation Distortion (SMPTE) < 0.1 %
Network Control (IRIS-Net) No
Number of Channels 2
Rated output power (*rated load) THD < 0.2%, 20Hz – 20kHz 250/125 W
Rated output power (*rated load) THD < 1%, 1kHz 270/135 W
Signal-to-Noise Ratio (A-weighted) 103 dB
Slew Rate 18 V/µs
Total Harmonic Distortion < 0.1 %
Weight Net 23.5 kg
Width 483 mm

Similar Products

PA1250T
Single-channel 250 W power amplifier

PA4150L
Quad 150 W per channel power amplifier

Support

Solutions

News Stories