One moment please while we configure for you...

Welcome to Please specify your country so we can customize your experience.

The Americas
Asia & the Pacific Rim
the Middle East, & Africa
Access to this file requires a registered account. Log in or use the link below to register an account.


590 W per channel remote control amplifier

  • P1200RT
  • Performance and control for fixed installation
  • 590 W per channel into 70/100 V line
  • Class-AB design
  • IRIS-Net enabled for remote control, monitoring, and DSP processing via included RCM-24 module
  • Eight recallable DSP/configuration presets
  • System check button for fast, complete test of all connected cables and loudspeaker components
  • Two GPI and two GPO ports
  • Parallel RJ-45 CAN bus connectors
  • Pilot tone detection for cable supervision
Connector Type Barrier strip
Continuous Rated Power (1 kHz, THD 1%) 100v 590 Watts
Continuous Rated Power (1 kHz, THD 1%) 70v 580 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 100v 500 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 70v 500 Watts
Control Protocol CAN-Bus
Controls 2 x 0 V, 5V free configurable, Easy-Remote
Cooling Front-to-rear, three 4-stage fans
DIM 30 < 0.2/< 0.3 % 100V/70V
FIR-Drive No
Frequency Response 45 - 20,000 Hz -1 dB
Input Impedance (Balanced) 20 kΩ XLR Input
Input Sensitivity 1.55 V (+6dBu)
Intermodulation Distortion (SMPTE) < 0.1/< 0.3 % 100V/70V
Maximum Input Voltage 8.7 V +21 dBu
Network Control (IRIS-Net) Yes
Serial Interface Network: CAN, 2 RJ45 (CAT-5 Cabling), RS-232 for media control systems
Signal-to-Noise Ratio (A-weighted) 106 dB
Topology Class-AB
Total Harmonic Distortion < 0.1/< 0.2 % 100V/70V
Height 3RU 132.5 mm (5.22")
Width 483 mm (19.02")
Depth 390 mm (15.35")
Weight Net 25 kg (55.12 lbs)


Remote control interface for IRIS-Net
Optional accessories
may be shown
Hover over image to zoom
Click image for full size
Knowledge & Support
Technical Support Group
Tel: (866) 782-8346

Warranty Information