One moment please while we configure Electro-Voice.com for you...
Electro-Voice.com

Welcome to Electro-Voice.com. Please specify your country so we can customize your experience.

The Americas
amer
Asia & the Pacific Rim
apr
Europe,
the Middle East, & Africa
emea
cn
Access to this file requires a registered account. Log in or use the link below to register an account.

CPS 4.10

1000 W per channel 4-channel amplifier

  • CPS 4.10
  • Four channels in one compact rack-efficient unit
  • 1000 W per channel
  • 70/100 V operation for distributed systems
  • Class-D design for optimum efficiency
  • Slot for optional RCM-810 module, allowing IRIS-Net control and monitoring
  • IRIS-Net selection of each channel's impedance (2-10 Ω in 0.1 Ω steps)
  • Rear-mounted attenuators
  • Switchable 50 Hz high-pass filter (Hi-Z mode)
  • Complete protection: thermal, overload, shorts, HF, DC, back-EMF, inrush current
  • Phoenix-type input and output connections
  • Remote power-on/off contact
  • Programmable power-on delay settings
  • Front-to-rear fans
Amplifier Gain 32 dB (Lo-Z), 33 dB (70V), 36 dB (100V)
Analog Inputs 4, electronically balanced, Phoenix-type
Audio Network No
CAN Bus Interface Optional (RCM-810 card)
Continuous Rated Power (1 kHz, THD 1%) 100v 1000 Watts
Continuous Rated Power (1 kHz, THD 1%) 2Ω 1000 Watts
Continuous Rated Power (1 kHz, THD 1%) 4Ω 1000 Watts
Continuous Rated Power (1 kHz, THD 1%) 70v 1000 Watts
Continuous Rated Power (1 kHz, THD 1%) 8Ω 500 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 100v 900 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω 900 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 70v 900 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω 450 Watts
Cooling Front-to-Rear, continuously variable fans
DIM 30 0.02 %
Electronics Type Amplifier
Frequency Response 15 Hz-30 kHz
Impedance 2/4/8/8 VLD/70 V/100V Ω
Input Impedance (Balanced) 20 kΩ
Input Sensitivity 0 dBu (.775V)-2 Ω, +3 dBu (1.1V)-4/8 Ω, +6 dBu (1.55) 70V/100V
Intermodulation Distortion (SMPTE) 0.05 %
Mains Voltage 220 - 240 V, 50 - 60 Hz or 120 V, 50 - 60 Hz, 50 - 60 Hz
Maximum Bridged Output 4Ω 2000 Watts
Maximum Bridged Output 8Ω 2000 Watts
Maximum Input Voltage 22 9.76 Vrms
Network Control (IRIS-Net) Optional (RCM-810 card)
Signal-to-Noise Ratio (A-weighted) 103 dB
Slew Rate 28 V/µs
Topology Class-D
Total Harmonic Distortion 0.05 %
Variable Load Drive (VLD) Yes
Height 2RU 88.1 mm (3.47")
Width 482.6 mm (19")
Depth 421.5 mm (16.59")
Weight Net 11.1 kg (24.47 lbs)
Optional accessories
may be shown
Hover over image to zoom
Click image for fullsize