CPS 2.6 MK II Contractor Precision Series Class-AB Power Amplifier by Electro-Voice
Access to this file requires a registered account. Log in or use the link below to register an account.


Contractor Precision Series Class-AB Power Amplifier

  • CPS 2.6 MK II
Designed for the contractor, the CPS 2.6 MK II feature 2-RU chassis, Phoenix-type connectors for inputs and outputs, pre-programmable power-on delay, easy power-on via remote contact closures, rear panel attenuators, and a switchable 50 Hz high-pass filter. Like the CPS multi-channel amplifiers, the CPS 2.6 MK II also includes a module slot for the RCM-810 remote-control module, enabling networking features for system diagnostics and control via IRIS-Net software.

  • Up to 2 x 900 W into 2 ohms
  • Phoenix-type input and output connections
  • Remote power-on/off contact
  • Rear-mounted attenuators
  • Programmable time for custom power-on delay settings
  • Module slot for optional RCM-810 card, allowing IRIS-Net control and monitoring
  • Switchable 50 Hz high-pass filter
  • Three-stage front-to-rear fans
  • Class-AB design
  • Complete protection package
Amplifier Gain 32 dB
Analog Inputs 2, electronically balanced, Phoenix-type
Audio Network No
CAN Bus Interface Optional (RCM-810 card)
Continuous Rated Power (1 kHz, THD 1%) 2Ω 900 Watts
Continuous Rated Power (1 kHz, THD 1%) 4Ω 600 Watts
Continuous Rated Power (1 kHz, THD 1%) 8Ω 380 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 4Ω 500 Watts
Continuous Rated Power (20-20 kHz, THD<0,2%) 8Ω 250 Watts
Cooling Front-to-Rear, 3-stage fans
Crossover Type Optional Modules
DIM 30 0.02 %
Electronics Type Amplifier
Frequency Response 10 Hz - 40 kHz ±1 dB
Impedance 2/4/8 Ω
Input Impedance (Balanced) 20 kΩ
Input Sensitivity +3.1 dBu (1.11Vrms)
Intermodulation Distortion (SMPTE) 0.05 %
Mains Voltage 240 V, 230 V, 120 V or 100 V; 50 Hz - 60 Hz (factory configured)
Maximum Bridged Output 4Ω 1800 Watts
Maximum Bridged Output 8Ω 1200 Watts
Maximum Input Voltage +21 dBu 8.69 Vrms
Network Control (IRIS-Net) Optional
Slew Rate 26 V/µs
Topology Class-AB
Total Harmonic Distortion 0.03 %
Variable Load Drive (VLD) No
Height 2RU 3.47" (88.1 mm)
Width 19" (482.6 mm)
Depth 16.59" (421.5 mm)
Weight Net 14.8 kg (32.63 lbs)


IRIS-Net remote control module for CPS Series amplifiers


Remote control interface for IRIS-Net
Optional accessories
may be shown
Hover over image to zoom
Click image for full size