HP64
HP64 Medium Install Horn
The Electro-Voice® HP64 is a wide-range, flat-front, high-frequency, constant-directivity horn. It offers economy of space, where geometry is “just big enough for the job.” A horizontal angle is controlled over a frequency range of 1.7 kHz to 20 kHz, and the vertical angle is controlled from 1.8 kHz to 20 kHz with unusual precision. Loading is maintained to a low frequency of 650 Hz.
The HP Series horns (U.S. Patent no. 4,629,029) represent the latest development in Constant Directivity design, employing the same principles EV engineers used to design the world’s first Constant Directivity horns in 1974. The HP64's flat-front TransPlanar™ design makes it suitable for all modern boxes and clustered systems. A unique, integral, fiberglass-and-zinc construction gives a strength-to-weight ratio superior to conventional fiberglass horns, resulting in exceptional throat-area strength and elimination of wall vibrations. The HP64's special, vaned, waveguide throat detail delivers superior, high-frequency, vertical control compared to similar two-inch-throat horn designs.
The HP Series horns (U.S. Patent no. 4,629,029) represent the latest development in Constant Directivity design, employing the same principles EV engineers used to design the world’s first Constant Directivity horns in 1974. The HP64's flat-front TransPlanar™ design makes it suitable for all modern boxes and clustered systems. A unique, integral, fiberglass-and-zinc construction gives a strength-to-weight ratio superior to conventional fiberglass horns, resulting in exceptional throat-area strength and elimination of wall vibrations. The HP64's special, vaned, waveguide throat detail delivers superior, high-frequency, vertical control compared to similar two-inch-throat horn designs.
Specifications
| Coverage (nominal -6dB) H° | 60 ° |
| Coverage (nominal -6dB) V° | 40 ° |
| Weight Net | 2.5 kg ( 5.51 lbs ) |
| Dimensions (HxWxD) | 279 x 224 x 220 mm (10.98" x 8.82" x 8.66") |
Downloads
Related Products
ND6-8/ND6-16
Large-format, neodymium compression driver.• Three-inch, titanium diaphragm
• 1.4-inch exit
• Seventy-five-watt power capacity• EV’s finest compression driver delivers world-class performance in any application, and is used in EV’s best loudspeaker systems.
An ADH-6 adaptor is required for EV HP Horns.
DH7-8/DH7-16
Large-format, ferrite compression driver.• Three-inch, titanium diaphragm
• 1.4-inch exit
• Seventy-five-watt power capacity• Large-format performance at lower cost, very similar to the ND6 flagship, but with slightly lower magnetic strength and slightly lower sensitivity.
An ADH-6 adaptor is required for EV HP horns.
DH3/2010A
Small-format, ferrite compression driver.• 1.25-inch, titanium diaphragm
• One-inch, screw-on exit
• Twenty-watt power rating
• Works well with direct-radiating woofers in high-value, moderately high-output, two-way loudspeaker systems.• For use as a supertweeter in custom high-performance systems.
An ADH-5 adaptor is required for EV HP horns.
An ADH-3 adaptor is required for one-inch throat horns.
DH2T-8/DH2T-16
Medium-format, ferrite compression driver.• Two-inch, titanium diaphragm
• One-inch, screw-on exit
• 40-watt power rating• For use in applications where cost is an important factor but high-performance is necessary.
An ADH-5 adaptor is required for EV HP horns.
An ADH-3 adaptor is required for one-inch throat horns.