Sx300E

Sx/Sb Series Speaker System

"the world's best lightweight, high-power speaker system" with 300 watts continuous, 1,200 watt peak power handling. Delivers over 125 dB continuous, 131 dB peaks (1 w / 1 m) at full power. 65° x 65° Constant-directivity horn allows use vertically or horizontally with identical coverage. Delivers better pattern control and projection than typical 90° horns Proven, reliable EV components including DL12BFH cast-frame 12-inch woofer and DH2010a pure titanium compression driver Ring-Mode Decoupling (RMD) delivers unequalled vocals and pure, accurate instruments and mids Rugged, durable polypropylene enclosure is light and strong. Available in black or white Built-in stand mount and inserts in enclosure allow the system to be safely suspended and arrayed using a wide range of optional cost-effective hardware. Can also be used as a floor monitor with F200 attachment Parallel Neutrik Speakon input connectors for safe, loss-free connections

Specifications

Frequency Response (-10dB) 50 - 20000 Hz
Sensitivity 1W/1m 99 dB
Max. SPL / 1m (calc) 131 dB
Coverage (nominal -6dB) H° 65 °
Coverage (nominal -6dB) V° 65 °
System Power Handling (continuous/program/peak) 300/600/1200 Watts
LF Transducer DL12BFH
HF Transducer DH2010
Crossover Frequency 1500 Hz
Nominal Impedance (Passive) 8 Ohms
Minimum Impedance 6 Ohms
Color Black
Color White
Directivity Index 11.1 dB
Flying Yes
Input Connections Four-pin Speakon (2)
Outdoor No
Chassis Size 12 inches
Internal CrossoverYes
Speaker TypeFullrange, Mid-High, Two-Way
Weight Net14.5 kg ( 31.97 lbs )
Dimensions (HxWxD)586 x 429 x 312 mm
(23.07" x 16.89" x 12.28")

Accessories

F200
Stage monitor feet kit for SX100, SX300, SxA100+, SxA360.
Mb100
Forged eyebolt attachment kit (set of three, black) for a single Sb122, Sx100+, Sx300, SxA100+ and SxA360
Mb200
Wall/ceiling bracket U-bracket kit for Sb122, Sx100+, Sx300, SxA100+ or SxA360,
Mb300
Horizontal array kit for side-by-side arraying of two Sb122, Sx100+, Sx300, SxA100+ or SxA360 (use a second Mb300 to array three systems; the Mb300 requires one Mb200 U-bracket kit per speaker system).