XGS-4 Groundstack
X-Line Very Compact Groundstack Rails
The X-Line Very Compact Groundstack Rails feature 3 rigging attachment positions to allow for single or dual columns of X-Line Very Compact Loudspeaker Arrays to be Groundstacked and tilted to obtain the desired sound coverage. The3 rigging attachment positions allow for 2 options -
Stack dual arrays; an XLD281 array at the front position and an XS212 subwoofer array at the rear position.Stack a single array of XLD281’s, XLE181’s, or a combination of XLD281’s and XS212’s at the middle position.Specifications
| Speaker Type | Hardware |
Downloads
Related Products
XLD281
The XLD281 is the core element for constructing X-Line Very Compact systems. The XLD281 is a three–way design using Coverage Control Technology (CCT™) to provide control horizontal coverage to 250Hz. The XLD281 uses an eight-inch, neodymium, low-frequency transducer, an eight-inch, neodymium, LF/MB transducer, and two neodymium, two-inch, voice-coil compression drivers combining through two Hydra™ plane wave generators into a 120 degree x 10 degree waveguide. CCT™ uses both eight-inch transducers to provide maximum low-frequency output and operating bandwidth while controlling horizontal beamwidth to 250 Hz by using DSP. The XLD281 can be used in triamp mode, or in biamp using a sophisticated internal passive network. Designed for use in arrays of four or more elements, the XLD281 delivers full-bandwidth audio with precise, predictable coverage control. Integrated rigging with hinge points located correctly between array elements is easy to use and quickly provides uncompromised line array performance. Ground-stacking is easy using array rails or subwoofers as the array base.
XLE181
The XLE181 is a two-way design using the same eight-inch, neodymium LF/MB transducer as the XLD281, and the same dual, ND2S high-frequency driver combination with a 120 degree x 10 degree waveguide coverage. At less than 40lbs (18 kg) per unit, the XLE offers a powerful, very compact solution for sound reinforcement applications with limited space and load capacity. The XLE181 can be used in biamp mode or full-range using a sophisticated internal passive network. Designed for the use in arrays of four and more elements, the XLE181 delivers full-bandwidth audio with precise, predictable coverage control. The integrated rigging is easy to use and quickly provides uncompromised line array performance.
XS212
The XS212 is a double, 12-inch, bass cabinet featuring two of the new DVX3120 woofers. A unique configuration allows side-firing transducers to match the XLD281 horizontal coverage and match the rigging footprint. This allows the use of XS212 above or below arrays of XLD281 or, if vertical space is limited to be flown behind the full range array. Depending on music style and taste the ratio of XLD to XS212 is three or four to one. One ground-stacked XS212 is the same height as two XLD281, which is convenient for transportation. EV® is one of the very few loudspeaker manufacturers that has the experience, heritage, and capability to design and build their own transducers. The DVX3120 is the latest model from the new DVXSeries. Forced-air, voice-coil cooling provides very low-power compression for very high SPL capability, low distortion, and reliability.
