HP6040
HP Horns
The HP6040 is a large-format, two-inch horn. It features the ultimate in dispersion control, with control of rated dispersion angle down to 500Hz, both horizontally and vertically. The HP6040 also features directivity control to 500 Hz to maximize vocal intelligibility and musical clarity in difficult acoustic environments.
Specifications
| Coverage (nominal -6dB) H° | 60 ° |
| Coverage (nominal -6dB) V° | 40 ° |
| Directivity Index | 14.1 dB |
| Weight Net | 9.1 kg ( 20.06 lbs ) |
| Dimensions (HxWxD) | 813 x 711 x 808 mm (32.01" x 27.99" x 31.81") |
Related Products
ND6-8/ND6-16
Large-format, neodymium compression driver.• Three-inch, titanium diaphragm
• 1.4-inch exit
• Seventy-five-watt power capacity• EV’s finest compression driver delivers world-class performance in any application, and is used in EV’s best loudspeaker systems.
An ADH-6 adaptor is required for EV HP Horns.
DH7-8/DH7-16
Large-format, ferrite compression driver.• Three-inch, titanium diaphragm
• 1.4-inch exit
• Seventy-five-watt power capacity• Large-format performance at lower cost, very similar to the ND6 flagship, but with slightly lower magnetic strength and slightly lower sensitivity.
An ADH-6 adaptor is required for EV HP horns.
ND6x-8/ND6-16
Large-format, neodymium compression driver.• Three-inch, titanium diaphragm
• 1.4-inch exit
• Fifty-watt power capacity• Takes full power down to 500 Hz— for use in high-performance applications where the crossover frequency is below the ND6’s 1,000 Hz.
An ADH-6 adaptor is required for EV HP horns.
DH2T-8/DH2T-16
Medium-format, ferrite compression driver.• Two-inch, titanium diaphragm
• One-inch, screw-on exit
• 40-watt power rating• For use in applications where cost is an important factor but high-performance is necessary.
An ADH-5 adaptor is required for EV HP horns.
An ADH-3 adaptor is required for one-inch throat horns.