HP420
HP Horns
The HP420 is a medium-format, two-inch horn. Its vertical dimensions have been reduced for use in constrained spaces where large-format horns cannot fit. The HP420 maintains horizontal directional control to 500 Hz and vertical control to 1,500 Hz.
Specifications
| Coverage (nominal -6dB) H° | 40 ° |
| Coverage (nominal -6dB) V° | 20 ° |
| Directivity Index | 16.8 dB |
| Weight Net | 5.9 kg ( 13.01 lbs ) |
| Dimensions (HxWxD) | 367 x 610 x 749 mm (14.45" x 24.02" x 29.49") |
Downloads
Related Products
ND6-8/ND6-16
Large-format, neodymium compression driver.• Three-inch, titanium diaphragm
• 1.4-inch exit
• Seventy-five-watt power capacity• EV’s finest compression driver delivers world-class performance in any application, and is used in EV’s best loudspeaker systems.
An ADH-6 adaptor is required for EV HP Horns.
DH7-8/DH7-16
Large-format, ferrite compression driver.• Three-inch, titanium diaphragm
• 1.4-inch exit
• Seventy-five-watt power capacity• Large-format performance at lower cost, very similar to the ND6 flagship, but with slightly lower magnetic strength and slightly lower sensitivity.
An ADH-6 adaptor is required for EV HP horns.
ND6x-8/ND6-16
Large-format, neodymium compression driver.• Three-inch, titanium diaphragm
• 1.4-inch exit
• Fifty-watt power capacity• Takes full power down to 500 Hz— for use in high-performance applications where the crossover frequency is below the ND6’s 1,000 Hz.
An ADH-6 adaptor is required for EV HP horns.
DH2T-8/DH2T-16
Medium-format, ferrite compression driver.• Two-inch, titanium diaphragm
• One-inch, screw-on exit
• 40-watt power rating• For use in applications where cost is an important factor but high-performance is necessary.
An ADH-5 adaptor is required for EV HP horns.
An ADH-3 adaptor is required for one-inch throat horns.