FRi-152/85
FRi Series Speaker System
FRi Series brings premium EV components, including the DH2T compression driver and DL series woofers, to a new level of affordability. The FRi Series provides exceptional value where flexibility and performance is required in permanent installations. Suspension is achieved by using the numerous threaded mounting points. These allow flexible installation in any situation.
Compact two-way 15-inch medium- and short-throw full-range system Solid, 42 Hz low end means that supplementary bass is not required in many applications
Compact two-way 15-inch medium- and short-throw full-range system Solid, 42 Hz low end means that supplementary bass is not required in many applications
Specifications
| Frequency Response (-3dB) | 42 - 15000 Hz |
| Frequency Response (-10dB) | 30 - 16000 Hz |
| Sensitivity 1W/1m | 98 dB |
| Max. SPL/1m (calc); half space | 129 dB |
| Coverage (nominal -6dB) H° | 80 ° |
| Coverage (nominal -6dB) V° | 55 ° |
| Rotatable Horn | No |
| System Power Handling (continuous/program/peak) | 350/700/1400 Watts |
| Low Frequency Power Handling (continuous/program/peak) | 350/700/1400 Watts |
| High Frequency Power Handling (continuous/program/peak) | 40/80/160 Watts |
| LF Transducer | EV DL15BFH |
| HF Transducer | EV DH2T |
| Nominal Impedance (Passive) | 8 Ohms |
| LF Nominal Impedance | 8 Ohms |
| HF Nominal Impedance | 8 Ohms |
| Enclosure Material | 7-ply cross-grain-laminated plywood |
| Color | Black |
| Color | Unfinished |
| Color | White |
| Flying | Included |
| Flying | Yes |
| Input Connections | Barrier Strips (Dual) |
| Outdoor | No |
| Transformer | No |
| Chassis Size | 15 inches |
| Internal Crossover | Selectable |
| Speaker Type | Fullrange, Mid-High, Two-Way |
| Weight Net | 27.3 kg ( 60.19 lbs ) |
| Dimensions (HxWxD) | 711 x 487 x 590 mm (27.99" x 19.17" x 23.23") |
Related Press Releases
Related Products
Dx38
2-in/4-out loudspeaker processor 115 dB dynamic range, for highest audio performance 48-bit filter algorithms 24-bit A/D and D/A conversion Real-time control and configuration via front panel or PC interface with RACE software supplied RS-232, MIDI interfaces are standard, RS-485 bus for networking optional Contact-closure interface optional.
CPS 2.11
With Electro-Voice’s new CPS 2.11 Contractor Precision Series Class-H Power Amplifier you get more of what you have come to expect from EV’s original CPS power amplifiers: higher efficiency, more flexibility, and a more compact format. These state-of-the-art power amplifiers offer our proven original CPS performance and reliability in a new compact, lightweight format. A highly efficient Class-H design makes this possible and results in considerably less heat generation. This allows the overall size of the amplifier to be reduced substantially. without sacrificing performance or reliability. In addition, new features enhance operational flexibility in many of your installations. And all of these features couple to our comprehensive protection package present in all EV CPS amplifiers. No amplifier on the market can offer such a high level of power performance and reliability as the CPS 2.11. At 1100 watts per channel, the CPS 2.11 can power large stadium, theater, and auditorium installations with ease.
FRi+ 181S
18-inch low-frequency system l Extends FRi bass to 36 Hz l Built-in Low-pass filter -- may be traditionally biamped or simply connected in parallel with full-range systems | Vented slot load design | Trapezoidal (7.5° per side) | Comes with 4 eyebolts | 16 x 3/8”-16 suspension points