P1200RL
Precision Series DSP Remote Amplifiers
Features IRIS-Net Compatable Control System
Major Highlights
Remote control and supervision of up to 100 amplifiers via one (or multiple) PCs. Central supervision of all amplifiers and connected loudspeakers. State-of-the-art signal processing (Filter, Delay, Level, Dynamic). Display of the acoustical response of EV speakers in realtime with IRIS-Net. Integration with life-safety systems and control of external equipment . Exceptional audio performance; extreme reliability 2 x 600 watts into 4 ohms; 2 x 850 watts into 2 ohms Loudspeaker outputs on easy to connect barrier strips.Specifications
| Amplifier Gain (dB) | 30dB |
| Continuous rated power (1k Hz, THD 1%) 2Ω | 850 Watts |
| Continuous rated power (1k Hz, THD 1%) 4Ω | 600 Watts |
| Input Impedance (balanced) | 20 kΩ |
| Continuous rated power (1k Hz, THD 1%) 8Ω | 380 Watts |
| Continuous rated power (20-20k Hz, THD<0,2%) 4Ω |
500 Watts |
| Continuous rated power (20-20k Hz, THD<0,2%) 8Ω |
300 Watts |
| Maximum bridged output 4Ω | 1700 Watts |
| Maximum bridged output 8Ω | 1200 Watts |
| Control Protocol | CAN-Bus |
| Electronics Type | Amplifier |
| Network Control (IRIS-Net) | Yes |
| Total harmonic distortion | < 0.05 % |
| Intermodulation Distortion (SMTPE) | < 0.08 % |
| DIM 30 | < 0.03 % |
| Signal-to-noise ratio (A–weighted) | > 105 dB |
| Input Sensitivity | +6 dBu |
| Weight Net | 17 kg ( 37.48 lbs ) |
| Dimensions (HxWxD) | 132.5 x 483 x 390 mm (5.22" x 19.02" x 15.35") |
Related Products
N8000
The EV NetMax N8000 is an extremely flexible audio control processor for a wide range of applications. Presented in a compact 2RU configuration, you can configure the N8000 a number of ways to fit the need at hand. By simply selecting the right combination of I/O cards, the N8000 matrix can be configured IN THE FIELD to one of 6 matrix layouts. In addition, up to a full 32 channels of digital audio are available when you add CobraNet™ functionality to any of these configurations for extended flexibility.
Superior Audio Performance
The N8000 provides the same legendary audio dynamic range as our amplifiers and signal processors. Superior A/D and D/A conversion technology and wideband electronics ensure that the NetMax N8000 will be transparent in the audio chain.
Easy Interface To The Outside World
The N8000 can be configured from the web, an Ethernet connection using IRIS-Net, an RS-232 interface or a common USB link. In addition, the N8000 can talk through its integrated CAN bus with any compatible IRIS-Net hardware such as the Electro-Voice remote control amplifier series. For even more flexibility the N8000 comes equipped with a GPIO network so it can control and be controlled through simple logic signals and contact closures.
UCC1
The UCC1 USB-CAN Converter is a bi-directional USB-to-CAN interface for connecting PC or Notebook computers to Electro-Voice devices with CAN interfaces, such as the DSP Precision Series Amplifiers, RCM-26 module for Tour Grade Series Amplifiers and REV Wireless Microphone receivers. The UCC1 is a standalone unit with interface drivers for CAN and USB, audio monitoring output for amplifier channels, USB and CAN controllers for converting commands and data between PC and CAN-bus-units. The isolated CAN-bus interface reduces ground-loop interference noise to an absolute minimum. The UCC1 receives its operational power via USB from the connected PC, so that no external power supply unit is needed. The compact UCC1 adapter is mainly aimed for connection to a laptop or notebook computer. However, the supplied 19“ front panel allows trouble-free integration in a rack system.Up to 5 UCC1s can be used on a single network to create multiple monitoring and control positions.