P900RL

Precision Series™ DSP Remote Amplifiers

Features IRIS-Net Compatable Control System



Remote control and supervision of up to 100 amplifiers via one (or multiple) PCs running IRIS-Net software. Central supervision of all amplifiers and connected loudspeakers State-of-the-art signal processing (Filter, Delay, Level, Dynamic) Display of the acoustical response of EV speakers in realtime (RACE) Integration with life-safety systems and control of external equipment Exceptional audio performance; extreme reliability Ideal for HF drive in multi-way systems 2 x 450 watts into 4 ohms; 2 x 650 watts into 2 ohms Loudspeaker outputs on barrier strip.

Specifications

Amplifier Gain (dB) 28.8dB
Continuous rated power (1k Hz, THD 1%) 2Ω 650 Watts
Continuous rated power (1k Hz, THD 1%) 4Ω 450 Watts
Input Impedance (balanced) 20 kΩ
Continuous rated power (1k Hz, THD 1%) 8Ω 280 Watts
Continuous rated power
(20-20k Hz, THD<0,2%) 4Ω
350 Watts
Continuous rated power
(20-20k Hz, THD<0,2%) 8Ω
230 Watts
Maximum bridged output 4Ω 1300 Watts
Maximum bridged output 8Ω 900 Watts
Control Protocol CAN-Bus
Electronics Type Amplifier
Network Control (IRIS-Net) Yes
Total harmonic distortion < 0.05 %
Intermodulation Distortion (SMTPE) < 0.08 %
DIM 30 < 0.03 %
Signal-to-noise ratio (A–weighted) > 105 dB
Input Sensitivity +6 dBu
Weight Net16 kg ( 35.27 lbs )
Dimensions (HxWxD)132.5 x 483 x 390 mm
(5.22" x 19.02" x 15.35")

Related Products

UCC1
The UCC1 USB-CAN Converter is a bi-directional USB-to-CAN interface for connecting PC or Notebook computers to Electro-Voice devices with CAN interfaces, such as the DSP Precision Series Amplifiers, RCM-26 module for Tour Grade Series Amplifiers and REV Wireless Microphone receivers. The UCC1 is a standalone unit with interface drivers for CAN and USB, audio monitoring output for amplifier channels, USB and CAN controllers for converting commands and data between PC and CAN-bus-units. The isolated CAN-bus interface reduces ground-loop interference noise to an absolute minimum. The UCC1 receives its operational power via USB from the connected PC, so that no external power supply unit is needed. The compact UCC1 adapter is mainly aimed for connection to a laptop or notebook computer. However, the supplied 19“ front panel allows trouble-free integration in a rack system.Up to 5 UCC1s can be used on a single network to create multiple monitoring and control positions.