XLD291

The Electro-Voice® Xsub(F) high-output, dual, 1200-watt, subwoofer system features EVX 180B woofers in a rectangular cabinet with a footprint identical to other X-Line systems. As a linear array technology system, the Xsub(F) can be flown or ground-stacked with the Xsub non-flying version. Ring Mode Decoupling (RMD) provides level, independent fidelity, and the Xsub's new proprietary rigging allows for rapid venue load-in and load-out, linking hardware included. One of four application-specific X-Line™ models.

The XLD 281 is the core element for constructing X-Line Very Compact systems. The XLD281 is a 3–way design using CCT™ (Coverage Control Technology) to control horizontal coverage to 250Hz. It uses an 8" neodymium LF transducer, an 8" neodymium LF/MB transducer, and two neodymium 2" voice coil compression drivers combining through 2 hydra plane wave generators into a 120° x 10° waveguide. CCT uses both 8" transducers to provide maximum low frequency output and operating bandwidth while controlling horizontal beam width to 250 Hz by using DSP. The XLD281 can be used in tri-amp mode, or in bi-amp using a sophisticated internal passive network. Designed for use in arrays of four or more elements, the XLD281 delivers full bandwidth audio with precise, predictable coverage control. Integrated rigging with hinge points located correctly between array elements is simple to use and quickly provides uncompromised line array performance. Ground stacking is easily done using array rails or subwoofers as the array base.

The XS212 is a double 12-inch bass cabinet featuring two of the new DVX3120 woofers. A unique configuration allows side firing transducers to match the XLD281 horizontal coverage and match the rigging footprint. That allows to either use the XS212 above or below arrays of XLD281 or, if vertical space is limited to be flown behind the full range array. Depending on music style and taste the ratio of XLD to XS212 is 3 or 4 to 1. Ground stacked one XS212 has the same heights as two XLD281 which is convenient for transportation. EV® is one of the very few loudspeaker manufacturers that has a long experience, heritage and capability for designing and building their own transducers. The DVX3120 is the latest model from the brand new DVXSeries. Forced-Air-Voice-Coil-Cooling provides very low power compression for very high SPL capability, low distortion and reliability.

Tour Grade amplifiers have a microprocessor controlled operation management system that provides useful features like compound thermal management (preventing amps from switching off in excessive thermal environment) and automatic mains voltage detection. Tour Grade amplifiers use grounded bridge, two-step, class-H topology to ensure the highest acoustic performance and reliability. The TG Series also offers power and transient response to drive subwoofers, along with low distortion for critical HF signals. The high-capacity switchmode power supply provides the headroom needed to ensure high dynamic outputs and reliable operation on extreme low loads.

Tour Grade amplifiers have a microprocessor controlled operation management system that provides useful features such as compound thermal management (preventing amps from switching off in excessive thermal environment), automatic mains voltage detection, and circuit breaker control that allows the TG-7 to operate on a 30A (120-volt) or 16A (230-volt) circuit breaker with normal music signal. Tour Grade amplifiers use a grounded bridge, three-step, class-H topology to ensure the highest acoustic performance and reliability. The TG Series also offers the power and transient response to drive subwoofers along with low distortion for critical HF signals. The high-capacity switchmode power supply provides the headroom needed to ensure high dynamic outputs and reliable operation on extreme low loads.