XCS312
The Electro-Voice® XCS312 is designed for high-level, low-frequency extension to 40 Hz in a cardioid configuration. It uses three DVX3120 forced-air-cooled, 12-inch transducers capable of long, linear excursion and high power handling in a two-channel configuration.
XCS312s are designed to be used with a ratio of four XLD281 or XLD291 full-range systems for each XCS312 subwoofer. The XLVC family consists of two full-range Line Array Elements with dual woofers, two full-range Line Array Elements with single woofers and two subwoofer systems. The dual woofer Line Array Element includes the XLD281 with a 120 degree horizontal coverage pattern and the XLD291 with a 90 degree horizontal coverage pattern. The single-woofer Line Array Element includes the XLE181 with a 120 degree horizontal coverage pattern and the XLE191 with a 90 degree horizontal coverage pattern.
The XCS312 cardioid subwoofer module has the same rigging footprint as the XLD281 and XLD291, which allows it to be directly arrayed above, or below XLD281 or XLD291 full-range systems. LAPS modeling software quickly provides array configurations and rigging information. XCS312 subwoofers can be used as the base for ground-stack applications, or by using EV’s XGS-4 ground-stack Kit for XLVC. XLVC delivers unprecedented performance in applications ranging from live reinforcement, to performing arts venues, to house-of-worship.
XCS312s are designed to be used with a ratio of four XLD281 or XLD291 full-range systems for each XCS312 subwoofer. The XLVC family consists of two full-range Line Array Elements with dual woofers, two full-range Line Array Elements with single woofers and two subwoofer systems. The dual woofer Line Array Element includes the XLD281 with a 120 degree horizontal coverage pattern and the XLD291 with a 90 degree horizontal coverage pattern. The single-woofer Line Array Element includes the XLE181 with a 120 degree horizontal coverage pattern and the XLE191 with a 90 degree horizontal coverage pattern.
The XCS312 cardioid subwoofer module has the same rigging footprint as the XLD281 and XLD291, which allows it to be directly arrayed above, or below XLD281 or XLD291 full-range systems. LAPS modeling software quickly provides array configurations and rigging information. XCS312 subwoofers can be used as the base for ground-stack applications, or by using EV’s XGS-4 ground-stack Kit for XLVC. XLVC delivers unprecedented performance in applications ranging from live reinforcement, to performing arts venues, to house-of-worship.
Specifications
| Frequency Response (-3dB) | 45 - 100 Hz |
| Frequency Response (-10dB) | 40 - 100 Hz |
| Recommended High-Pass Frequency | 40 Hz |
| Sensitivity 1W/1m | 100 dB |
| Max. SPL / 1m (calc) | 130 dB |
| Low Frequency Power Handling (continuous/program/peak) | 1000/2000/4000 Watts |
| LF Transducer | 3 x EV DVX3120 |
| Crossover Frequency | 100 Hz |
| Color | Black |
| Flying | Included |
| Input Connections | 2 Neutrik® NL8 |
| Chassis Size | 12 inches |
| Speaker Type | Line Arrays, Subs |
Related Press Releases
Downloads
Related Products
XLD281
The XLD281 is the core element for constructing X-Line Very Compact systems. The XLD281 is a three–way design using Coverage Control Technology (CCT™) to provide control horizontal coverage to 250Hz. The XLD281 uses an eight-inch, neodymium, low-frequency transducer, an eight-inch, neodymium, LF/MB transducer, and two neodymium, two-inch, voice-coil compression drivers combining through two Hydra™ plane wave generators into a 120 degree x 10 degree waveguide. CCT™ uses both eight-inch transducers to provide maximum low-frequency output and operating bandwidth while controlling horizontal beamwidth to 250 Hz by using DSP. The XLD281 can be used in triamp mode, or in biamp using a sophisticated internal passive network. Designed for use in arrays of four or more elements, the XLD281 delivers full-bandwidth audio with precise, predictable coverage control. Integrated rigging with hinge points located correctly between array elements is easy to use and quickly provides uncompromised line array performance. Ground-stacking is easy using array rails or subwoofers as the array base.
XLE181
The XLE181 is a two-way design using the same eight-inch, neodymium LF/MB transducer as the XLD281, and the same dual, ND2S high-frequency driver combination with a 120 degree x 10 degree waveguide coverage. At less than 40lbs (18 kg) per unit, the XLE offers a powerful, very compact solution for sound reinforcement applications with limited space and load capacity. The XLE181 can be used in biamp mode or full-range using a sophisticated internal passive network. Designed for the use in arrays of four and more elements, the XLE181 delivers full-bandwidth audio with precise, predictable coverage control. The integrated rigging is easy to use and quickly provides uncompromised line array performance.
TG5
Tour Grade amplifiers have a microprocessor controlled operation management system that provides useful features like compound thermal management (preventing amps from switching off in excessive thermal environment) and automatic mains voltage detection. Tour Grade amplifiers use grounded bridge, two-step, class-H topology to ensure the highest acoustic performance and reliability. The TG Series also offers power and transient response to drive subwoofers, along with low distortion for critical HF signals. The high-capacity switchmode power supply provides the headroom needed to ensure high dynamic outputs and reliable operation on extreme low loads.
TG7
Tour Grade amplifiers have a microprocessor controlled operation management system that provides useful features such as compound thermal management (preventing amps from switching off in excessive thermal environment), automatic mains voltage detection, and circuit breaker control that allows the TG-7 to operate on a 30A (120-volt) or 16A (230-volt) circuit breaker with normal music signal. Tour Grade amplifiers use a grounded bridge, three-step, class-H topology to ensure the highest acoustic performance and reliability. The TG Series also offers the power and transient response to drive subwoofers along with low distortion for critical HF signals. The high-capacity switchmode power supply provides the headroom needed to ensure high dynamic outputs and reliable operation on extreme low loads.
XLD291
The XLD291 is the core element for constructing X-Line Very Compact systems. The XLD281 is a three–way design using Coverage Control Technology (CCT™) to provide control horizontal coverage to 250Hz. The XLD291 uses an eight-inch, neodymium, low-frequency transducer, an eight-inch, neodymium, LF/MB transducer, and two neodymium, two-inch, voice-coil compression drivers combining through two Hydra™ plane wave generators into a 120 degree x 10 degree waveguide. CCT™ uses both eight-inch transducers to provide maximum low-frequency output and operating bandwidth while controlling horizontal beamwidth to 250 Hz by using DSP. The XLD291 can be used in triamp mode, or in biamp using a sophisticated internal passive network. Designed for use in arrays of four or more elements, the XLD291 delivers full-bandwidth audio with precise, predictable coverage control. Integrated rigging with hinge points located correctly between array elements is easy to use and quickly provides uncompromised line array performance. Ground-stacking is easy using array rails or subwoofers as the array base.
XLE191
The XLE191 is a two-way design using the same eight-inch, neodymium LF/MB transducer as the XLD291, and the same dual, ND2S high-frequency driver combination with a 120 degree x 10 degree waveguide coverage. At less than 40lbs (18 kg) per unit, the XLE offers a powerful, very compact solution for sound reinforcement applications with limited space and load capacity. The XLE191 can be used in biamp mode or full-range using a sophisticated internal passive network. Designed for the use in arrays of four and more elements, the XLE191 delivers full-bandwidth audio with precise, predictable coverage control. The integrated rigging is easy to use and quickly provides uncompromised line array performance.
