XLD291-FG

Fiberglass 3- way, high-output, very compact line-array element

Summary & Images Specs Where to buy Downloads & Support
  • Very Compact, Lightweight
  • CCT (Coverage Control Technology)
  • Simple, Quick Integrated Rigging
  • Bi-Amp or Tri-Amp Operation
  • Neodymium Transducers

The XLD291-FG is a 3–way design using CCT (Coverage Control Technology) to control horizontal coverage to 200 Hz. It uses an 8 inch neodymium LF transducer, an 8 inch neodymium LF/MB transducer, and two neodymium 2 inch voice coil compression drivers combining through 2 hydra plane wave generators into a 90° x 10° waveguide. CCT uses both 8 inch transducers to provide maximum low frequency output and operating bandwidth while controlling horizontal beam width to 200 Hz by using DSP. The FG models are fully-weatherized and fiberglass-coated.

The XLD291-FG can be used in tri-amp mode, or in biamp using a sophisticated internal passive network. Designed for use in arrays of four or more elements, the XLD291-FG delivers full bandwidth audio with precise, predictable coverage control. Integrated rigging with hinge points located correctly between array elements is simple to use and quickly provides uncompromised line array performance.

The XLVC weatherized family consists of two full-range systems with dual woofers, two full-range systems with single woofers and a subwoofer system. The dualwoofer versions include the XLD281-FG with a 120° horizontal coverage pattern and the XLD291-FG with a 90° horizontal coverage pattern. The single-woofer versions include the XLE181-FG with a 120° horizontal coverage pattern and the XLE191-FG with a 90° horizontal coverage pattern. The subwoofer module is the XCS312-FG. Most applications using flown very compact elements require subwoofers integrated into the same array as the full-range systems. XLVC provides three methods to conveniently do this. The XCS312-FG subwoofer module can be directly arrayed above, or below XLD291-FG full-range systems. LAPS2 modeling software quickly provides array configurations and rigging information.

X-Line Very Compact weatherized models deliver unprecedented performance in outdoor venues in full exposure.

Specifications

Frequency Response (-3 dB)75 Hz-18 kHz 1
Frequency Range (-10 db)60 Hz-20 kHz 1
Max Calculated SPL138 dB Cont., 144 dB Peak 2

Horizontal Coverage90°
Vertical CoverageArray Dependant, Software Definable
RiggingFully Captive Aluminum, 1° increments, 16 elements with 8 to 1 Safety Factor
LF1 Power Handling200 W Cont., 800 W Peak
LF2 Power Handling200 W Cont., 800 W Peak
HF Power Handling80 W Cont., 320 W Peak
Biamp LF1/HF Power Handling200 W Cont., 800 W Peak
LF2 – 200 W Cont., 800 W Peak
Bandpass Frequency50 - 250 Hz 3
LF1 to HF Crossover Frequency1760 Hz 3
LF 1 Passband1 x 8" DVN2080, 16 ohms
LF2 Passband1 x 8 inch DVN2080, 16 ohms
HF Passband2 x ND2S-8, 16 ohms
Biamp LF1/HF Passband16 ohms
ConnectorsGland nut with 30ft cable
Enclosure13-ply plywood with fiberglass and EVCoat
GrilleStainless steel with powder coat paint and hydrophobic cloth
Environmental SpecificationsIEC 60529, IP55
Dimensions (H x W x D)9.90 in x 28.58 in x 14.52 in (251 mm x 726 mm x 369 mm)
Net Weight48 lb (21.8 kg)
Shipping Weight51 lb (23.1 kg)
1 Full Space Measurement of four (4) elements.
2 Full Space Measurement of HF section of four (4) elements, SPL adjusted for 1 m distance.
3 Use EV signal processing or download presets from Electro-Voice website.

Where to Buy

Install Sound Partners

Install Where To Buy

Electro-Voice together with our certified partners, are ready to help support you through planning, purchase, and setup. Services available through our network of highly-qualified associates and partners may include:

  1. System Design
  2. Installation
  3. Programming & Commissioning
Get started

Downloads

Warranty & After Sales Programs

Compatible Products

sprites_global sprites_ev