L1800FD DSP power amplifier, live
L1800FD DSP power amplifier, live
A 2-channel live DSP power amplifier rated 2 x 900 W, with integrated FIR Drive speaker processing, controlled in SONICUE.
productPage.features
Take the speaker processing with you. The L1800FD pairs 2 x 900 W of Class AB power with fully integrated FIR Drive, so FIR filters, PEQ, and per-channel delay live in the amplifier instead of a separate box. Set it up and supervise it in SONICUE, drive down to 2 ohm, or bridge for 2800 W into 4 ohm, cooled by 3-stage front-to-rear fans and guarded by a full protection suite. Two rack units. Touring rigs, live production, theaters, and performance spaces that want processing and power in one chassis.
- Power with headroom: 1200 W per channel into 2.6 ohm, 1400 W into 2 ohm, 2800 W bridged into 4 ohm.
- Processing on board: FIR Drive puts FIR filters, PEQ, and per-channel delay inside the amplifier.
- Set up in SONICUE: full configuration and supervision from Dynacord's sound system software.
- Class AB output stage: matched to the power class for efficient, reliable touring duty.
- Protected and cooled: audio limiters plus temperature, DC, HF, back-EMF and short-circuit protection, 3-stage fans.
productPage.info.specs
Overview & Features
- Configuration
2-channel, Class AB
Acoustic Performance
- Frequency Response
10 Hz to 21 kHz (±1 dB)
- THD+N
< 0.05 %
- Crosstalk between channels (dBA)
< -80 dB
- Signal-to-Noise Ratio
>105 dB
Power & Amplification
- Total Output Power*
1800 W