IX60:4
IX60:4
SIX KILOWATTS. ONE RACK SPACE.
A 4-channel networked DSP amplifier with 6 kW total output, a 12 x 12 matrix mixer, and SONICUE control.
Drive the demanding room without filling the rack. The IX60:4 delivers 6 kW of powerTANK power across four channels, with a native 96 kHz DSP, a 12 x 12 matrix mixer, Dynacord FX, and FIR-Drive — fed by eight Dante inputs, eight Dante outputs, and four mic/line inputs. powerTANK drives Hi-Z or Lo-Z without a mode switch. ghostPOWER over PoE keeps the system alive when mains drops, and ecoRAIL trims the draw. Stadium, arena, large worship, performing-arts center.
Key features
Serious output, single rack unit
6 kW total across four channels — up to 1,800 W on a single channel.
powerTANK power sharing
One power budget for the whole amplifier — powerTANK shares the total output across channels, so any channel can draw more when it needs it.
Hi-Z or Lo-Z drive per channel
Select constant-voltage or low-impedance operation for each channel — no bridging required for 100 V lines.
Mixer built in
native 96 kHz DSP with a 12 x 12 matrix mixer, Dynacord FX, and FIR-Drive.
Stay up when mains drops
ghostPOWER over PoE holds the DSP, Dante network, and inputs active.
Run lean
patented ecoRAIL technology trims energy draw, with idle/eco mode at 34 W.
Keep latency off the list
0.77 ms signal delay, analog in to speaker out.
Complete the System
Where this unit fits, and what it pairs with.
Multichannel networked DSP amplifiers
IX Series Amplifiers
Specifications
Overview & Features
- Configuration
4-channel
Acoustic Performance
- Frequency Response
20 Hz to 20 kHz (±1 dB)
- THD+N
<0.1 %
- Crosstalk between channels (dBA)
< -80 dB
Power & Amplification
- Total Output Power*
6000 W
- Bridged Output Power 4 Ω
n.a.